***PC ip address is 192.168.10.11 mark 255.255.255.0
pspc.exe and image_rbt_sh_5_5_0d_n50_11_x86_64.img are on PC's Desktop and copy from pc command line to Riverbed
C:\Documents and Settings\Riverbed\Desktop>pscp image_rbt_sh_5_
C:\Documents and Settings\Riverbed\Desktop>pscp image_rbt_sh_5_5_0d_n50_11_x86_6
4.img admin@192.168.10.11:/var/opt/tms/images
The server's host key is not cached in the registry. You
have no guarantee that the server is the computer you
think it is.
The server's rsa2 key fingerprint is:
ssh-rsa 2048 4a:a9:e7:a9:fc:96:d6:36:22:71:f0:b7:08:4c:b2:28
If you trust this host, enter "y" to add the key to
PuTTY's cache and carry on connecting.
If you want to carry on connecting just once, without
adding the key to the cache, enter "n".
If you do not trust this host, press Return to abandon the
connection.
Store key in cache? (y/n) y
admin@192.168.10.11's password:
image_rbt_sh_5_5_0d_n50_1 | 95534 kB | 8684.9 kB/s | ETA: 00:00:00 | 100%
C:\Documents and Settings\Riverbed\Desktop>
***from Riverbed: ...
riverbed (config) # int primary ip address 192.168.10.11 /24 ?
riverbed (config) # int primary ip address 192.168.10.11 /24
riverbed (config) # wr mem
riverbed (config) # ping 192.168.10.10
connect: Network is unreachable
riverbed (config) # _shell
[admin@riverbed ~]# ifconfig primary
primary Link encap:Ethernet HWaddr 00:0E:B6:34:13:00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:20000
RX bytes:1056 (1.0 KiB) TX bytes:4152 (4.0 KiB)
Interrupt:185 Memory:fc9f0000-fca00000
[admin@riverbed ~]# ifconfig primary 192.168.10.11 netmask 255.255.255.0
[admin@riverbed ~]# ping 192.168.10.10
PING 192.168.10.10 (192.168.10.10) 56(84) bytes of data.
--- 192.168.10.10 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 1000ms
[admin@riverbed ~]# arp a-an
a-an: Host name lookup failure
[admin@riverbed ~]# arp -a
? (192.168.10.10) at
[admin@riverbed ~]# arping -I primary 192.168.10.10
ARPING 192.168.10.10 from 192.168.10.11 primary
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.643ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.637ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.625ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.633ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.658ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.637ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.740ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.662ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.675ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.634ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.637ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.631ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.633ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.640ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.651ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.645ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.620ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.597ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.633ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.626ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.641ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.746ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.703ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.663ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.643ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.661ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.645ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.653ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.636ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.639ms
Sent 77 probes (24 broadcast(s))
Received 30 response(s)
[admin@riverbed ~]# arping -I primary 192.168.10.10
ARPING 192.168.10.10 from 192.168.10.11 primary
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.721ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.769ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.667ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.655ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.759ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.695ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.704ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.767ms
Unicast reply from 192.168.10.10 [00:1C:23:2F:8B:7D] 0.752ms
Sent 9 probes (1 broadcast(s))
Received 9 response(s)
[admin@riverbed ~]# sh images
sh: images: No such file or directory
[admin@riverbed ~]# exit
logout
Riverbed Steelhead
riverbed login:
Riverbed Steelhead
riverbed login:
Riverbed Steelhead
riverbed login: admin
Password:
Last login: Thu Nov 11 09:34:26 on ttyS0
riverbed >
riverbed > en
riverbed # sh images
No image files are available to be installed.
Installed images:
Partition 1:
rbt_sh 4.1.8e #75_7 2009-04-17 09:03:09 x86_64 root@malmo:svn://svn/mgmt/tags/
tuvalu_75_fix_7
Partition 2:
rbt_sh 4.1.8e #75_7 2009-04-17 09:03:09 x86_64 root@malmo:svn://svn/mgmt/tags/
tuvalu_75_fix_7
Last boot partition: 1
Next boot partition: 1
riverbed # sh interface primary
Interface primary state
Up: yes
Interface type: ethernet
Netmask: 255.255.255.0
IP address: 192.168.10.11
Speed: 1000Mb/s (auto)
Duplex: full (auto)
MTU: 1500
HW address: 00:0E:B6:34:13:00
Link: yes
RX bytes: 15088
RX packets: 160
RX mcast packets: 0
RX discards: 0
RX errors: 0
RX overruns: 0
RX frame: 0
TX bytes: 15846
TX packets: 111
TX discards: 0
TX errors: 0
riverbed #
riverbed # sh interface primary
Interface primary state
Up: yes
Interface type: ethernet
Netmask: 255.255.255.0
IP address: 192.168.10.11
Speed: 1000Mb/s (auto)
Duplex: full (auto)
MTU: 1500
HW address: 00:0E:B6:34:13:00
Link: yes
RX bytes: 15088
RX packets: 160
RX mcast packets: 0
RX discards: 0
RX errors: 0
RX overruns: 0
RX frame: 0
TX bytes: 17230
TX packets: 115
TX discards: 0
TX errors: 0
Up: 1q yes
riverbed # show images
Images available to be installed:
image_rbt_sh_5_5_0d_n50_11_x86_64.img
rbt_sh 5.5.0d #50_11 2008-12-19 20:24:29 x86_64 root@nusaybin:svn://svn/mgmt/b
ranches/guam_50_fix_branch
Installed images:
Partition 1:
rbt_sh 4.1.8e #75_7 2009-04-17 09:03:09 x86_64 root@malmo:svn://svn/mgmt/tags/
tuvalu_75_fix_7
Partition 2:
rbt_sh 4.1.8e #75_7 2009-04-17 09:03:09 x86_64 root@malmo:svn://svn/mgmt/tags/
tuvalu_75_fix_7
Last boot partition: 1
Next boot partition: 1
riverbed # image install image_rbt_sh_5_5_0d_n50_11_x86_64.img 2
riverbed # boot system 2
% Unrecognized command "boot".
Type "?" for help.
riverbed # write mem
riverbed # reload
Rebooting...
riverbed #
System shutdown initiated -- logging off.
Riverbed Steelhead
Stopping mdinit: [ OK ]
Stopping pm: [ OK ]
Stopping irqbalance: [ OK ]
Stopping shutdown_check: [ OK ]
Shutting down kernel logger: [ OK ]
Shutting down system logger: [ OK ]
Starting killall: [ OK ]
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Saving random seed:
Syncing hardware clock to system time
Turning off swap:
Unmounting file systems:
Please stand by while rebooting the system...
md: stopping all md devices.
megaraid: flushing adapter 0...done
Restarting system.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to enter the menu
Booting Riverbed Steelhead Software v. 4.1.8e (64bit) in 0 seconds...
Booting 'Riverbed Steelhead Software v. 4.1.8e (64bit)'
root (hd1,1)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz ro root=/dev/sda5 console=tty0 console=ttyS0,9600n8
[Linux-bzImage, setup=0x1400, size=0x224754]
Bootdata ok (command line is ro root=/dev/sda5 console=tty0 console=ttyS0,9600n8)
Linux version 2.6.9-34.EL-rbt-3006SMP (root@malmo.lab.nbttech.com) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-9)) #1 SMP Fri Apr 17 08:38:29 PDT 2009
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000fbff0000 (usable)
BIOS-e820: 00000000fbff0000 - 00000000fbfff000 (ACPI data)
BIOS-e820: 00000000fbfff000 - 00000000fc000000 (ACPI NVS)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000204000000 (usable)
Enabling SRAT NUMA discovery
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 100000-fbffffff
SRAT: Node 1 PXM 1 104000000-203ffffff
SRAT: Node 0 PXM 0 100000-103ffffff
SRAT: Node 0 PXM 0 0-103ffffff
Warning: acpi_table_parse(ACPI_SLIT) returned 0!
Bootmem setup node 0 0000000000000000-0000000103ffffff
Bootmem setup node 1 0000000104000000-0000000203ffffff
No mptable found.
DMI 2.3 present.
ACPI: PM-Timer IO Port: 0x5008
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3 15:1 APIC version 16
Setting APIC routing to flat
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfebfe000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 17, address 0xfebfe000, GSI 24-27
ACPI: IOAPIC (id[0x06] address[0xfebff000] gsi_base[28])
IOAPIC[2]: apic_id 6, version 17, address 0xfebff000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ 8000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 8000000
Built 2 zonelists
Kernel command line: ro root=/dev/sda5 console=tty0 console=ttyS0,9600n8
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2393.202 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Memory: 8175280k/8454144k available (2942k kernel code, 0k reserved, 1749k data, 196k init)
Calibrating delay using timer specific routine.. 4793.22 BogoMIPS (lpj=2396613)
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD CPU0: Physical Processor ID: 0
AMD CPU0: Processor Core ID: 0
AMD CPU0: Initial APIC ID: 0
CPU 0(2) -> Node 0
Physical Processor ID 0: Turned off C1-clock ramping
Using local APIC NMI watchdog using perfctr0
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD CPU0: Physical Processor ID: 0
AMD CPU0: Processor Core ID: 0
AMD CPU0: Initial APIC ID: 0
CPU 0(2) -> Node 0
Physical Processor ID 0: Turned off C1-clock ramping
CPU0: Dual Core AMD Opteron(tm) Processor 280 stepping 02
per-CPU timeslice cutoff: 1024.03 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 rip 6000 rsp 101090b9f58
Initializing CPU#1
Calibrating delay using timer specific routine.. 4785.68 BogoMIPS (lpj=2392840)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD CPU1: Physical Processor ID: 0
AMD CPU1: Processor Core ID: 1
AMD CPU1: Initial APIC ID: 1
CPU 1(2) -> Node 0
Physical Processor ID 0: Turned off C1-clock ramping
Dual Core AMD Opteron(tm) Processor 280 stepping 02
Booting processor 2/2 rip 6000 rsp 10203f8bf58
Initializing CPU#2
Calibrating delay using timer specific routine.. 4785.70 BogoMIPS (lpj=2392851)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD CPU2: Physical Processor ID: 1
AMD CPU2: Processor Core ID: 0
AMD CPU2: Initial APIC ID: 2
CPU 2(2) -> Node 1
Physical Processor ID 1: Turned off C1-clock ramping
Dual Core AMD Opteron(tm) Processor 280 stepping 02
Booting processor 3/3 rip 6000 rsp 100fbf93f58
Initializing CPU#3
Calibrating delay using timer specific routine.. 4785.70 BogoMIPS (lpj=2392851)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD CPU3: Physical Processor ID: 1
AMD CPU3: Processor Core ID: 1
AMD CPU3: Initial APIC ID: 3
CPU 3(2) -> Node 1
Physical Processor ID 1: Turned off C1-clock ramping
Dual Core AMD Opteron(tm) Processor 280 stepping 02
Total of 4 processors activated (19150.31 BogoMIPS).
Using local APIC timer interrupts.
Detected 12.464 MHz APIC timer.
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
Disabling vsyscall due to use of PM timer
time.c: Using PM based timekeeping.
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Loading RVBD MD Module Version [2.6.23-rvbd]
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:04:00.0[D] -> GSI 19 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:04:00.1[D] -> GSI 19 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:04:04.0[A] -> GSI 17 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 26 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 27 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:03:0e.0[C] -> GSI 25 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 28 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:01:01.1[B] -> GSI 29 (level, low) -> IRQ 217
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 8000000 size 65536 KB
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1289470241.441:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
Fixing up AMD8131 IOAPIC mode
Fixing up AMD8131 IOAPIC mode
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
ACPI: Processor [CPU4] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ÿttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using deadline io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 2.6.10-13S)
Intel(R) PRO/1000 Network Driver - version 7.4.35
Copyright (c) 1999-2007 Intel Corporation.
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 28 (level, low) -> IRQ 209
PCI ID: vendor = 1374, device = 0029, subvendor = 1374, subdevice = 0029
e1000: 0000:01:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:0e:b6:85:cf:18
e1000: eth0: e1000_probe: Silicom PXG2BPIG series adapter
ACPI: PCI interrupt 0000:01:01.1[B] -> GSI 29 (level, low) -> IRQ 217
PCI ID: vendor = 1374, device = 0029, subvendor = 1374, subdevice = 0029
e1000: 0000:01:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:0e:b6:85:cf:19
e1000: eth1: e1000_probe: Silicom PXG2BPIG series adapter
Intel(R) PRO/1000 Network Driver - 0.2.0
Copyright (c) 1999-2007 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.2.22
Copyright (c) 2007-2008 Intel Corporation.
pcnet32.c:v1.31 29.04.2005 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
tg3.c:v3.43b (Oct 24, 2005)
ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 26 (level, low) -> IRQ 185
eth2: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:0e:b6:34:13:00
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
eth2: dma_rwctrl[769f0000]
eth2: con_dump_register: pagesz=264, npages: 8
ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 27 (level, low) -> IRQ 193
eth3: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:0e:b6:34:13:01
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth3: dma_rwctrl[769f0000]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD8111: IDE controller at PCI slot 0000:00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: TRANSCEND, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 1014048 sectors (519 MB) w/1KiB Cache, CHS=1006/16/63, DMA
hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
megaraid: probe new device 0x1000:0x0409:0x1000:0x3008: bus 3:slot 14:func 0
ACPI: PCI interrupt 0000:03:0e.0[C] -> GSI 25 (level, low) -> IRQ 201
megaraid: fw version:[815C] bios version:[H432]
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
scsi[0]: scanning scsi channel 1 [virtual] for logical drives
Vendor: MegaRAID Model: LD 0 RAID1 712G Rev: 815C
Type: Direct-Access ANSI SCSI revision: 02
3ware 9000 Storage Controller device driver for Linux v2.26.05.007.
SCSI device sda: 1458978816 512-byte hdwr sectors (746997 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
SCSI device sda: 1458978816 512-byte hdwr sectors (746997 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
Attached scsi disk sda at scsi0, channel 1, id 0, lun 0
Fusion MPT base driver 3.12.27.00
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT FC Host driver 3.12.27.00
Fusion MPT SAS Host driver 3.12.27.00
Fusion MPT misc device (ioctl) driver 3.12.27.00
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ACPI: PCI interrupt 0000:04:00.0[D] -> GSI 19 (level, low) -> IRQ 169
ohci_hcd 0000:04:00.0: OHCI Host Controller
ohci_hcd 0000:04:00.0: irq 169, pci mem ffffff0000006000
ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:04:00.1[D] -> GSI 19 (level, low) -> IRQ 169
ohci_hcd 0000:04:00.1: OHCI Host Controller
ohci_hcd 0000:04:00.1: irq 169, pci mem ffffff000001a000
ohci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v2.2
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
Loading RVBD RAID10 Module Version [2.6.23-rvbd]
md: raid10 personality registered for level 10
Crash dump driver initialized.
block device driver for LKCD registered
dump gzip safety buffer: 0000010203ccf000, 4096
NET: Registered protocol family 2
IP: routing cache hash table of 65536 buckets, 1024Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
PCI1 USB0 USB1 UAR1 UAR2 GOLA GOLB PWRB
Setting up fail make_request
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 196k freed
INIT: version 2.85 booting
Welcome.Starting udev: [ OK ]
Initializing hardware... storage done[ OK ]
Configuring kernel parameters: [ OK ]
Setting clock (utc): Thu Nov 11 10:11:01 UTC 2010 [ OK ]
Setting hostname localhost: [ OK ]
[/sbin/fsck.ext3 (1) -- /config] fsck.ext3 -a /dev/sda9
CONFIG: clean, 28/18144 files, 7020/72292 blocks
[ OK ]
Checking filesystems:
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda2
BOOT_1: clean, 30/34272 files, 16087/136552 blocks
[ OK ]
[/sbin/fsck.ext3 (1) -- /bootmgr] fsck.ext3 -a /dev/sda1
BOOTMGR: clean, 21/66528 files, 16765/265072 blocks
[ OK ]
[/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a /dev/sda8
VAR: clean, 711/2626560 files, 116337/5242880 blocks
[ OK ]
[/sbin/fsck.ext3 (1) -- /config] fsck.ext3 -a /dev/sda9
CONFIG: clean, 28/18144 files, 7020/72292 blocks
[ OK ]
Mounting local filesystems: [ OK ]
Flash configuration ok
Configuring system for crash dumps [ OK ]
Saving crash dump (if one exists)
INIT: Entering runlevel: 3ild at
Entering non-interactive startup
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting irqbalance: [ OK ]
Starting rbtkmod: [ OK ]
Starting shutdown_check: [ OK ]
Starting mdinit: [ OK ]
Starting internal_startup: [ OK ]
Starting shinit: [ OK ]
Starting pm: [ OK ]
Starting vservers: [ OK ]
Starting csoftwatch: [ OK ]
Starting oom_profile: [ OK ]
Starting softwatch: [ OK ]
Starting load-debug: [ OK ]
Riverbed Steelhead
riverbed login: admin
Password:
Last login: Thu Nov 11 09:57:50 on ttyS0
System initializing.............
Done!
riverbed > en
riverbed # sh ver
Product name: rbt_sh
Product release: 4.1.8e
Build ID: #75_7
Build date: 2009-04-17 09:03:09
Build arch: x86_64
Built by: root@malmo
Uptime: 1m 54s
Product model: 5520
System memory: 5823 MB used / 2160 MB free / 7984 MB total
Number of CPUs: 4
CPU load averages: 0.41 / 0.22 / 0.08
riverbed # boot system 2
% Unrecognized command "boot".
Type "?" for help.
riverbed # wri mem
riverbed # reload
Rebooting...
riverbed #
System shutdown initiated -- logging off.
Riverbed Steelhead
Stopping mdinit: [ OK ]
Stopping pm: [ OK ]
Stopping irqbalance: [ OK ]
Stopping shutdown_check: [ OK ]
Shutting down kernel logger: [ OK ]
Shutting down system logger: [ OK ]
Starting killall: [ OK ]
Sending all processes the TERM signal...
Sending all processes the KILL signal...
Saving random seed:
Syncing hardware clock to system time
Turning off swap:
Unmounting file systems:
Please stand by while rebooting the system...
md: stopping all md devices.
megaraid: flushing adapter 0...done
Restarting system.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to continue.
Press any key to enter the menu
Booting Riverbed Steelhead Software v. 4.1.8e (64bit) in 3 seconds...
GNU GRUB version 0.95 (639K lower / 4127680K upper memory)
-------------------------------------------------------------------
0: Riverbed Steelhead Software v. 4.1.8e (64bit)
1: Riverbed Steelhead Software v. 5.5.0d (64bit)
2: Restore: Riverbed Steelhead Software v. 4.1.8e (64bit)
3: Restore: Riverbed Steelhead Software v. 4.1.8e (64bit)
-------------------------------------------------------------------
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, 'e' to edit the
commands before booting, 'a' to modify the kernel arguments
before booting, or 'c' for a command-line.
Highlighted entry is 1:
Booting 'Riverbed Steelhead Software v. 5.5.0d (64bit)'
root (hd1,2)
Filesystem type is ext2fs, partition type 0x83
kernel /vmlinuz ro root=/dev/sda6 console=tty0 console=ttyS0,9600n8
[Linux-bzImage, setup=0x1400, size=0x28f9dc]
Bootdata ok (command line is ro root=/dev/sda6 console=tty0 console=ttyS0,9600n8)
Linux version 2.6.9-34.EL-rbt-2562SMP (root@nusaybin.lab.nbttech.com) (gcc version 3.4.4 20050721 (Red Hat 3.4.4-2)) #1 SMP Fri Dec 19 18:39:00 PST 2008
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000fbff0000 (usable)
BIOS-e820: 00000000fbff0000 - 00000000fbfff000 (ACPI data)
BIOS-e820: 00000000fbfff000 - 00000000fc000000 (ACPI NVS)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000204000000 (usable)
Enabling SRAT NUMA discovery
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 1 -> APIC 2 -> Node 1
SRAT: PXM 1 -> APIC 3 -> Node 1
SRAT: Node 0 PXM 0 100000-fbffffff
SRAT: Node 1 PXM 1 104000000-203ffffff
SRAT: Node 0 PXM 0 100000-103ffffff
SRAT: Node 0 PXM 0 0-103ffffff
Warning: acpi_table_parse(ACPI_SLIT) returned 0!
Bootmem setup node 0 0000000000000000-0000000103ffffff
Bootmem setup node 1 0000000104000000-0000000203ffffff
No mptable found.
DMI 2.3 present.
ACPI: PM-Timer IO Port: 0x5008
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 15:1 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3 15:1 APIC version 16
Setting APIC routing to flat
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x05] address[0xfebfe000] gsi_base[24])
IOAPIC[1]: apic_id 5, version 17, address 0xfebfe000, GSI 24-27
ACPI: IOAPIC (id[0x06] address[0xfebff000] gsi_base[28])
IOAPIC[2]: apic_id 6, version 17, address 0xfebff000, GSI 28-31
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Using ACPI (MADT) for SMP configuration information
Checking aperture...
CPU 0: aperture @ 8000000 size 32 MB
Aperture from northbridge cpu 0 too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 8000000
Built 2 zonelists
Kernel command line: ro root=/dev/sda6 console=tty0 console=ttyS0,9600n8
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 131072 bytes)
time.c: Using 3.579545 MHz PM timer.
time.c: Detected 2393.207 MHz processor.
Console: colour VGA+ 80x25
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Memory: 8174312k/8454144k available (3600k kernel code, 0k reserved, 2027k data, 196k init)
Calibrating delay using timer specific routine.. 4793.20 BogoMIPS (lpj=2396603)
Mount-cache hash table entries: 256 (order: 0, 4096 bytes)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD CPU0: Physical Processor ID: 0
AMD CPU0: Processor Core ID: 0
AMD CPU0: Initial APIC ID: 0
CPU 0(2) -> Node 0
Physical Processor ID 0: Turned off C1-clock ramping
Using local APIC NMI watchdog using perfctr0
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD CPU0: Physical Processor ID: 0
AMD CPU0: Processor Core ID: 0
AMD CPU0: Initial APIC ID: 0
CPU 0(2) -> Node 0
Physical Processor ID 0: Turned off C1-clock ramping
CPU0: Dual Core AMD Opteron(tm) Processor 280 stepping 02
per-CPU timeslice cutoff: 1024.03 usecs.
task migration cache decay timeout: 2 msecs.
Booting processor 1/1 rip 6000 rsp 101090b9f58
Initializing CPU#1
Calibrating delay using timer specific routine.. 4785.70 BogoMIPS (lpj=2392850)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD CPU1: Physical Processor ID: 0
AMD CPU1: Processor Core ID: 1
AMD CPU1: Initial APIC ID: 1
CPU 1(2) -> Node 0
Physical Processor ID 0: Turned off C1-clock ramping
Dual Core AMD Opteron(tm) Processor 280 stepping 02
Booting processor 2/2 rip 6000 rsp 10203f8bf58
Initializing CPU#2
Calibrating delay using timer specific routine.. 4785.69 BogoMIPS (lpj=2392845)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD CPU2: Physical Processor ID: 1
AMD CPU2: Processor Core ID: 0
AMD CPU2: Initial APIC ID: 2
CPU 2(2) -> Node 1
Physical Processor ID 1: Turned off C1-clock ramping
Dual Core AMD Opteron(tm) Processor 280 stepping 02
Booting processor 3/3 rip 6000 rsp 100fbf93f58
Initializing CPU#3
Calibrating delay using timer specific routine.. 4785.69 BogoMIPS (lpj=2392847)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 1024K (64 bytes/line)
AMD CPU3: Physical Processor ID: 1
AMD CPU3: Processor Core ID: 1
AMD CPU3: Initial APIC ID: 3
CPU 3(2) -> Node 1
Physical Processor ID 1: Turned off C1-clock ramping
Dual Core AMD Opteron(tm) Processor 280 stepping 02
Total of 4 processors activated (19150.29 BogoMIPS).
Using local APIC timer interrupts.
Detected 12.464 MHz APIC timer.
checking TSC synchronization across 4 CPUs: passed.
Brought up 4 CPUs
Disabling vsyscall due to use of PM timer
time.c: Using PM based timekeeping.
NET: Registered protocol family 16
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040816
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Loading RVBD MD Module Version [2.6.23-rvbd]
PCI: Using ACPI for IRQ routing
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 19 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:04:00.0[D] -> GSI 19 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:04:00.1[D] -> GSI 19 (level, low) -> IRQ 169
ACPI: PCI interrupt 0000:04:04.0[A] -> GSI 17 (level, low) -> IRQ 177
ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 26 (level, low) -> IRQ 185
ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 27 (level, low) -> IRQ 193
ACPI: PCI interrupt 0000:03:0e.0[C] -> GSI 25 (level, low) -> IRQ 201
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 28 (level, low) -> IRQ 209
ACPI: PCI interrupt 0000:01:01.1[B] -> GSI 29 (level, low) -> IRQ 217
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 8000000 size 65536 KB
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
audit: initializing netlink socket (disabled)
audit(1289470567.436:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SGI XFS with security attributes, large block/inode numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
Fixing up AMD8131 IOAPIC mode
Fixing up AMD8131 IOAPIC mode
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Processor [CPU1] (supports C1, 8 throttling states)
ACPI: Processor [CPU2] (supports C1)
ACPI: Processor [CPU3] (supports C1)
ACPI: Processor [CPU4] (supports C1)
Real Time Clock Driver v1.12
Linux agpgart interface v0.100 (c) Dave Jones
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ÿttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using deadline io scheduler
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
HP CISS Driver (v 2.6.10-13S)
Intel(R) PRO/1000 Network Driver - version 7.4.35
Copyright (c) 1999-2007 Intel Corporation.
ACPI: PCI interrupt 0000:01:01.0[A] -> GSI 28 (level, low) -> IRQ 209
PCI ID: vendor = 1374, device = 0029, subvendor = 1374, subdevice = 0029
e1000: 0000:01:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:0e:b6:85:cf:18
e1000: eth0: e1000_probe: Silicom PXG2BPIG series adapter
ACPI: PCI interrupt 0000:01:01.1[B] -> GSI 29 (level, low) -> IRQ 217
PCI ID: vendor = 1374, device = 0029, subvendor = 1374, subdevice = 0029
e1000: 0000:01:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:0e:b6:85:cf:19
e1000: eth1: e1000_probe: Silicom PXG2BPIG series adapter
Intel(R) PRO/1000 Network Driver - 0.2.0
Copyright (c) 1999-2007 Intel Corporation.
Intel(R) Gigabit Ethernet Network Driver - version 1.2.22
Copyright (c) 2007-2008 Intel Corporation.
pcnet32.c:v1.31 29.04.2005 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
tg3.c:v3.43b (Oct 24, 2005)
ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 26 (level, low) -> IRQ 185
eth2: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:0e:b6:34:13:00
eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[1] TSOcap[0]
eth2: dma_rwctrl[769f0000]
eth2: con_dump_register: pagesz=264, npages: 8
ACPI: PCI interrupt 0000:02:05.1[B] -> GSI 27 (level, low) -> IRQ 193
eth3: Tigon3 [partno(BCM95704A6) rev 2100 PHY(5704)] (PCIX:66MHz:64-bit) 10/100/1000BaseT Ethernet 00:0e:b6:34:13:01
eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
eth3: dma_rwctrl[769f0000]
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
AMD8111: IDE controller at PCI slot 0000:00:07.1
AMD8111: chipset revision 3
AMD8111: not 100% native mode: will probe irqs later
AMD8111: 0000:00:07.1 (rev 03) UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:pio, hdd:pio
hda: TRANSCEND, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 128KiB
hda: 1014048 sectors (519 MB) w/1KiB Cache, CHS=1006/16/63, DMA
hda: hda1 hda2 hda3
ide-floppy driver 0.99.newide
megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
megaraid: 2.20.4.9 (Release Date: Sun Jul 16 12:27:22 EST 2006)
megaraid: probe new device 0x1000:0x0409:0x1000:0x3008: bus 3:slot 14:func 0
ACPI: PCI interrupt 0000:03:0e.0[C] -> GSI 25 (level, low) -> IRQ 201
megaraid: fw version:[815C] bios version:[H432]
scsi0 : LSI Logic MegaRAID driver
scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
scsi[0]: scanning scsi channel 1 [virtual] for logical drives
Vendor: MegaRAID Model: LD 0 RAID1 712G Rev: 815C
Type: Direct-Access ANSI SCSI revision: 02
3ware 9000 Storage Controller device driver for Linux v2.26.05.007.
SCSI device sda: 1458978816 512-byte hdwr sectors (746997 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
SCSI device sda: 1458978816 512-byte hdwr sectors (746997 MB)
sda: asking for cache data failed
sda: assuming drive cache: write through
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
Attached scsi disk sda at scsi0, channel 1, id 0, lun 0
Fusion MPT base driver 3.12.27.00
Copyright (c) 1999-2007 LSI Corporation
Fusion MPT FC Host driver 3.12.27.00
Fusion MPT SAS Host driver 3.12.27.00
Fusion MPT misc device (ioctl) driver 3.12.27.00
mptctl: Registered with Fusion MPT base driver
mptctl: /dev/mptctl @ (major,minor=10,220)
ACPI: PCI interrupt 0000:04:00.0[D] -> GSI 19 (level, low) -> IRQ 169
ohci_hcd 0000:04:00.0: OHCI Host Controller
ohci_hcd 0000:04:00.0: irq 169, pci mem ffffff0000006000
ohci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI interrupt 0000:04:00.1[D] -> GSI 19 (level, low) -> IRQ 169
ohci_hcd 0000:04:00.1: OHCI Host Controller
ohci_hcd 0000:04:00.1: irq 169, pci mem ffffff000001a000
ohci_hcd 0000:04:00.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
USB Universal Host Controller Interface driver v2.2
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
Loading RVBD RAID10 Module Version [2.6.23-rvbd]
md: raid10 personality registered for level 10
Crash dump driver initialized.
block device driver for LKCD registered
dump gzip safety buffer: 0000010203d49000, 4096
NET: Registered protocol family 2
IP: routing cache hash table of 65536 buckets, 1024Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
PCI1 USB0 USB1 UAR1 UAR2 GOLA GOLB PWRB
Setting up fail make_request
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
VFS: Mounted root (ext3 filesystem) readonly.
Freeing unused kernel memory: 196k freed
INIT: version 2.85 booting
Welcome.Starting udev: [ OK ]
Initializing hardware... storage done[ OK ]
Configuring kernel parameters: [ OK ]
Setting clock (utc): Thu Nov 11 10:16:26 UTC 2010 [ OK ]
Setting hostname localhost: [ OK ]
[/sbin/fsck.ext3 (1) -- /config] fsck.ext3 -a /dev/sda9
CONFIG: clean, 28/18144 files, 7020/72292 blocks
[ OK ]
Checking filesystems:
[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda3
BOOT_2: clean, 24/34272 files, 13191/136552 blocks
[ OK ]
[/sbin/fsck.ext3 (1) -- /bootmgr] fsck.ext3 -a /dev/sda1
BOOTMGR: clean, 21/66528 files, 16765/265072 blocks
[ OK ]
[/sbin/fsck.ext3 (1) -- /var] fsck.ext3 -a /dev/sda8
VAR: clean, 711/2626560 files, 116368/5242880 blocks
[ OK ]
[/sbin/fsck.ext3 (1) -- /config] fsck.ext3 -a /dev/sda9
CONFIG: clean, 28/18144 files, 7020/72292 blocks
[ OK ]
Mounting local filesystems: [ OK ]
Running raid fw update script [ OK ]
Running firstboot script [ OK ]
Flash configuration ok
Configuring system for crash dumps [ OK ]
Saving crash dump (if one exists)
INIT: Entering runlevel: 3ild at Dec 19 2008 21:
Entering non-interactive startup
Starting system logger: [ OK ]
Starting kernel logger: [ OK ]
Starting fwkinit: [ OK ]
Starting irqbalance: [ OK ]
Starting rbtkmod: [ OK ]
Starting shutdown_check: [ OK ]
Starting mdinit: [ OK ]
Starting internal_startup: [ OK ]
Starting pm: [ OK ]
Starting vservers: [ OK ]
Starting csoftwat
Riverbed Steelhead
riverbed login:
Riverbed Steelhead
riverbed login:
Riverbed Steelhead
riverbed login:
Riverbed Steelhead
riverbed login: admin
Password:
Last login: Thu Nov 11 10:11:47 on ttyS0
riverbed > sh ver
Product name: rbt_sh
Product release: 5.5.0d
Build ID: #50_11
Build date: 2008-12-19 20:24:29
Build arch: x86_64
Built by: root@nusaybin
Uptime: 4m 22s
Product model: 5520
System memory: 5906 MB used / 2076 MB free / 7983 MB total
Number of CPUs: 4
CPU load averages: 0.14 / 0.20 / 0.09
riverbed > en
riverbed # show imags
% Unrecognized command "imags".
Type "show ?" for help.
riverbed # show images
Images available to be installed:
image_rbt_sh_5_5_0d_n50_11_x86_64.img
rbt_sh 5.5.0d #50_11 2008-12-19 20:24:29 x86_64 root@nusaybin:svn://svn/mgmt/b
ranches/guam_50_fix_branch
Installed images:
Partition 1:
rbt_sh 4.1.8e #75_7 2009-04-17 09:03:09 x86_64 root@malmo:svn://svn/mgmt/tags/
tuvalu_75_fix_7
Partition 2:
rbt_sh 5.5.0d #50_11 2008-12-19 20:24:29 x86_64 root@nusaybin:svn://svn/mgmt/b
ranches/guam_50_fix_branch
Last boot partition: 2
Next boot partition: 1
riverbed # boot system 2
% Unrecognized command "boot".
Type "?" for help.
riverbed # boot system 2
% Unrecognized command "boot".
Type "?" for help.
riverbed # wri mem
riverbed # show images
Images available to be installed:
image_rbt_sh_5_5_0d_n50_11_x86_64.img
rbt_sh 5.5.0d #50_11 2008-12-19 20:24:29 x86_64 root@nusaybin:svn://svn/mgmt/b
ranches/guam_50_fix_branch
Installed images:
Partition 1:
rbt_sh 4.1.8e #75_7 2009-04-17 09:03:09 x86_64 root@malmo:svn://svn/mgmt/tags/
tuvalu_75_fix_7
Partition 2:
rbt_sh 5.5.0d #50_11 2008-12-19 20:24:29 x86_64 root@nusaybin:svn://svn/mgmt/b
ranches/guam_50_fix_branch
Last boot partition: 2
Next boot partition: 1
riverbed # boot system 2
% Unrecognized command "boot".
Type "?" for help.
riverbed # conf t
riverbed (config) # boot system 2
riverbed (config) # wri meme
% Unrecognized command "meme".
Type "wri ?" for help.
riverbed (config) # wrimem
% Unrecognized command "wrimem".
Type "?" for help.
riverbed (config) # wri mem
riverbed (config) # sh images
Images available to be installed:
image_rbt_sh_5_5_0d_n50_11_x86_64.img
rbt_sh 5.5.0d #50_11 2008-12-19 20:24:29 x86_64 root@nusaybin:svn://svn/mgmt/b
ranches/guam_50_fix_branch
Installed images:
Partition 1:
rbt_sh 4.1.8e #75_7 2009-04-17 09:03:09 x86_64 root@malmo:svn://svn/mgmt/tags/
tuvalu_75_fix_7
Partition 2:
rbt_sh 5.5.0d #50_11 2008-12-19 20:24:29 x86_64 root@nusaybin:svn://svn/mgmt/b
ranches/guam_50_fix_branch
Last boot partition: 2
Next boot partition: 2
riverbed (config) #
No comments:
Post a Comment